Thonet
by Thonet (künstl. Urheberrecht: Mart Stam), 1998
— from 957,00 €
S 40 Outdoor Cantilever Chair, Without armrests
Thonet S 40 Outdoor Cantilever Chair
has been added to your wishlist.
has been added to your wishlist.
3 % advance payment discount*: 928,29 €
(Save 28,71 €)
The Thonet S 40 Outdoor cantilever chair was designed by Mart Stam in 1935 and brings the classic Bauhaus aura into the garden or onto the terrace. The combination of bent tubular steel and iroko wood bequeaths the Thonet chair a harmony and invites you to sit longer outdoors.
Details
Product type | Multi purpose chair |
Dimensions | Without armrests: Height: 85 cm Width: 45 cm Depth: 56 cm Seat height: 45 cm With armrests: Height: 85 cm Width: 55 cm Depth: 56 cm Seat height: 45 cm |
Material | Seat and backrest: Solid wood panels, iroko, oiled Frame: Stainless steel tube Glides: plastic, black |
Variants | Available with or without armrests |
Lieferumfang | With plastic glides |
Care | To clean the wood and metal surfaces, a soft, damp cloth and a mild, neutral detergent are recommended. |
Certificates & Sustainability | Thonet has declared sustainability to be a corporate principle. The manufacturer continuously optimizes all processes from production/technology, materials management and recyclability to transport routes and constantly pays attention to resource-saving energy and material consumption. Last but not least, social and ethical principles are among the top priorities. Thonet has been awarded the "Green Globe Certificate" for its measures of sustainable and environmentally friendly management - further information can be found here. |
Warranty | 24 months |
Product family | S 1040 Outdoor |
Produktdatenblatt | Please click on the picture for detailed information (ca. 1,3 MB). |
FAQ
?
Should the answers to your questions not be found here, our service team can be contacted Mon-Fri, 9 am - 5 pm via +49 341 2222 88 22.
Is it possible to retrofit glides to an S 40 Outdoor?
A Thonet cantilever chair is specially produced to allow a retrofitting with plastic glides (transparent or black) with or without felt insert using the pre-punched drill holes, add an additional 11 mm to the overall height and cost 29,- EUR per set / chair.On older cantilever models produced before 2010, the Thonet frames were pre-punched as standard and the glides are installed as follows: With a 4.2 mm drill (available at any hardware store or as the special-hardened Thonet drill bits for Euro) bore holes in the marked locations. The felt pads can then be attached using the supplied self-tapping screws.
What is the "Iroko" used in the S 40 Outdoor?
Solid Iroko is an African wood with high density and weather resistance, visually it has a pleasantly smooth, uniform surface.